HY-15-XO254G2W2U.HY-15-XO254G2W2U.HY-15-XO254G2W2U
HY-15-XO254G2W2U.
ONU/ONT

XPON ONU 2.5G+4GE+2WIFI+2USB HY-15-XO254G2W2U

Description

CG60052R17C XGPON ONU is equipped with 4*10/100/1000M network port, 1*10/100/1000/2500M network port, and 2 USB interfaces. Supports NAT public network conversion and game servers on Google and other platforms. Comply with IPTV, IGMP, Telnet, HTTP, HTTPS protocols, etc. Web interface upgrade available,Online upgrade and multicast upgrade. It can be used as a router, LAN1 can be used as an uplink port, and other ports can be used as current link ports to connect terminals. Two-level user management is possible, and verification code is supported to log in to the Wen management interface.

Overview

  • XGPON 2.5G+4G+WIFI+2USB is a broadband access device specially designed to meet the needs of fixed network operators for FTTH and triple play services.
  • XGPON 2.5G+4G+WIFI+2USB is based on a high-performance chip solution, supports XPON dual-mode technology (EPON and GPON), provides carrier-grade FTTH application data services, and supports OAM/OMCI management.
  • XGPON  2.5G+4G+WIFI+2USB supports layer 2/layer 3 functions such as IEEE802.11b/g/n/ac/ax  WiFi 6 technology, using 4×4 MIMO, with a maximum rate of up to 3000Mbps.
  • XGPON  2.5G+4G+WIFI+2USB are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
  • XGPON 2.5G+4G+WIFI+2USB are designed by Realtek chipset 9617C.

Feature

  • Supports Dual Mode (can access GPON/EPON OLT).
  • Comply with GPON G.987/G.9807.1 and IEEE 802.3av standards.
  • Support 802.11 b/g/a/n/ac/ax, 802.11ax WIFI6(4x4MIMO) function and Multiple SSID.
  • Support NAT, Firewall function.
  • Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect.
  • Support power-off alarm function ,easy for link problem detection.
  • Support port mode of VLAN configuration.
  • Support LAN IP and DHCP Server configuration.
  • Support TR069 Remote Configuration and WEB Management.
  • Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode.
  • Support IPv4/IPv6 dual stack.
  • Support IGMP transparent/snooping/proxy.
  • Support ACL and SNMP to configure data packet filter flexibly.
  • Compatible with popular OLTs(HW, ZTE, FiberHome, VSOL,cdata,HS,samrl,U2000…)，supports OAM/OMCI management.

Specification:

Technical Item Details
PON interface 1 0G GPON Class B+)

Upstream: 1270nm; Downstream: 1577nm

single mode，SC/APC connector

Receiving sensitivity: ≤-29dBm

Transmitting optical power: 2~+8dBm

Overload optical power:  – 8dBm(GPON)

Transmission distance: 20KM
LAN interface 1×10/100/1000M/2500Mbps auto adaptive Ethernet interfaces Full/Half,

4 x 10/100/1000Mbps auto adaptive Ethernet interfaces

Full/Half, RJ45 connector
USB Interface Stamdard USB2.0、Stamdard USB3.0
WIFI Interface Compliant with IEEE802.11b/g/n/ac/ax

2.4GHz Operating frequency: 2.400-2.483GHz

5.0GHz Operating frequency: 5.150-5.825GHz

Support 4*4MIMO, 5dBi external antenna, rate up to 3000Mbps

Support: multiple SSID
LED 14 LED,：PWR、LOS\PON、INTERNET、LAN1、LAN2、LAN3、LAN4、2.4G,、5G、WPS、USB2.0/USB3.0、2.5G LAN

 
Push-Button 3, for Function of Power on/off, Reset, WPS
Operating condition Temperature : 0℃～+50℃

Humidity :10%～90%（non-condensing）
Storing Condition Temperature : -40℃～+60℃

Humidity :10%～90%（non-condensing）
Power supply DC 12V/1.5A
Power Consumption <18W
Net Weight <0.4kg

 

 

 

Panel lights and Introduction

Pilot  Lamp Status Description
WIFI On The WIFI interface is up.
Blink The WIFI interface is sending or/and receiving data (ACT)
Off The WIFI interface is down.
WPS Blink The WIFI interface is securely establishing a connection.
Off The WIFI interface does not establish a secure connection.
INTERNET On The light is on when the device business configuration is normal.
Off The light does not light up when the device service configuration is blocked.
PWR On The device is powered up.
Off The device is powered down.
LOS Blink The device doses not receive optical signals or with low signals.
Off The device has received optical signal.
PON On The device has registered to the PON system.
Blink The device is registering the PON system.
Off The device registration is incorrect.
LAN1~LAN5 On Port (LANx) is connected properly (LINK).
Blink Port (LANx) is sending or/and receiving data (ACT).
Off Port(LANx) connection exception or not connected.
USB On USB device communication detected
Off No USB device detected or communicating

 

Related products