HY-15-XO1G1FW..HY-15-XO1G1FW..HY-15-XO1G1FW...
HY-15-XO1G1FW..
ONU/ONT

XPON ONU 1GE+1FE+WIFI HY-15-XO1G1FW

Description

XPON ONU modem is designed as HGU or SFU (Home Gateway Unit) in different FTTH solutions. The FTTH application provides data service access, and can automatically switch the OLT between EPON and GPON modes. WIFI adopts 2×2 MIMO, the maximum rate can reach 300Mbps, and the average rate can reach 160Mbps. It is a very good choice for gamers. You can freely switch between GOOGLE and enter various mobile game platforms freely.

The ONU terminal can be used in conjunction with the OLT central office to unify the network management, realize remote fault diagnosis and positioning, and issue TR069 OMCI commands. SMATR OLT, UP2000, Huawei, ZTE, FiberHome, CDATA, VSOL, HSGQ, BDCOM, etc. and reduce maintenance workload. And compatible with TR369, TR098 and other protocols and future smart home, smart furniture reserved super management

Overview

  • 1G1F+WIFI is designed as HGU (Home Gateway Unit) in deferent FTTH solutions; the carrier-class FTTH application provides data service access.
  • 1G1F+WIFI is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
  • 1G1F+WIFI adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
  • 1G1F+WIFIis compliant with IEEE802.11n STD, adopts with 2×2 MIMO, the highest rate up to 300Mbps.
  • 1G1F+WIFI+ is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
  • 1G1F+WIFI+ is designed by Realtek chipset 9602C.

Feature

  • Supports Dual Mode (can access GPON/EPON OLT).
  • Supports GPON G.984/G.988 standards.
  • Support 802.11n WIFI (2×2 MIMO) function.
  • Support NAT, Firewall function.
  • Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect.
  • Support port mode of VLAN configuration.
  • Support LAN IP and DHCP Server configuration.
  • Support TR069 Remote Configuration and WEB Management.
  • Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode.
  • Support IPv4/IPv6 dual stack.
  • Support IGMP transparent/snooping/proxy.
  • In compliant with IEEE802.3ah standard.
  • Compatible with popular OLT(HW, ZTE, FiberHome,VSOL…).

Specification:

Technical Item Details
PON interface 1 G/EPON port(EPON PX20+ and GPON Class B+)

Upstream: 1310nm; Downstream: 1490nm

SC/APC connector

Receiving sensitivity: ≤-28dBm

Transmitting optical power: 0~+4dBm

Transmission distance: 20KM
LAN interface 1×10/100/1000Mbps and 1×10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
WIFI Interface Compliant with IEEE802.11b/g/n

Operating frequency: 2.400-2.4835GHz

support MIMO, rate up to 300Mbps

2T2R,2 external antenna 5dBi

Support: Multiple SSID

Channel:13

Modulation type: DSSS、CCK and OFDM

Encoding scheme: BPSK、QPSK、16QAM and 64QAM
LED 7 LED, For Status of WIFI、WPS、PWR、LOS、PON、LAN1~LAN2
Push-Button 4, for Function of Power on/off, Reset, WPS, WIFI
Operating condition Temperature : 0℃～+50℃

Humidity :10%～90%（non-condensing）
Storing Condition Temperature : -40℃～+60℃

Humidity :10%～90%（non-condensing）
Power supply DC 12V/1A
Power Consumption <6W
Net Weight <0.4kg

Panel lights and Introduction

Pilot  Lamp Status Description
WIFI On The WIFI interface is up.
Blink The WIFI interface is sending or/and receiving data (ACT).
Off The WIFI interface is down.
WPS Blink The WIFI interface is securely establishing a connection.
Off The WIFI interface does not establish a secure connection.
PWR On The device is powered up.
Off The device is powered down.
LOS Blink The device doses not receive optical signals or with low signals.
Off The device has received optical signal.
PON On The device has registered to the PON system.
Blink The device is registering the PON system.
Off The device registration is incorrect.
LAN1~LAN2 On Port (LANx) is connected properly (LINK).
Blink Port (LANx) is sending or/and receiving data (ACT).
Off Port (LANx) connection exception or not connected.

Related products