HY-15-XO254G2CAP2W2UHY-15-XO254G2CAP2W2UHY-15-XO254G2CAP2W2U.
HY-15-XO254G2CAP2W2U
ONU/ONT

XPON ONU 2.5GE+4G+2CATV+POTs+2WIFI+2USB HY-15-XO254G2CAP2W2U

Description

XGSPON ONU HY-15-XO254G2CAP2W2U 10M/100M/1000M*4 and 1 2.5Gbps network port, supports 1FE/1GE/2.5G network port adaptation; the dual-band WIFI2.4G rate can reach 574Mbps, and the WIFI5.8G rate can reach 2402Mbps. WIFI encryption: WEP-64/WEP-128/WPA/WPA2/WPA3. Can automatically switch between EPON OLT and GPON OLT. Dual CATV function, supports XGSPON environment. Supports VOIP services of SIP protocol and complies with GR-909 comprehensive line test.1 standard USB2.0, 1USB3.0 interface. Support IPTV, IGMP, Telnet, HTTP, HTTPS protocols

Overview

  • XGSPON 2.5G+4G+WIFI+2CATV+POTs+2USB is a broadband access device specially designed to meet the needs of fixed network operators for FTTH and triple play services.
  • XGSPON 2.5G+4G+WIFI+2CATV+POTs+2USB is based on a high-performance chip solution, supports XPON dual-mode technology (EPON and GPON), provides carrier-grade FTTH application data services, and supports OAM/OMCI management.
  • XGSPON  2.5G+4G+WIFI+2CATV+POTs+2USB supports layer 2/layer 3 functions such as IEEE802.11b/g/n/ac/ax  WiFi 6 technology, using 4×4 MIMO, with a maximum rate of up to 3000Mbps.
  • XGSPON  2.5G+4G+WIFI+2CATV+POTs+2USB are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
  • XGSPON 2.5G+4G+WIFI+2CATV+POTs+2USB are designed by Realtek chipset 9617C.

Feature

  • Supports Dual Mode (can access GPON/EPON OLT).
  • Comply with GPON G.987/G.9807.1 and IEEE 802.3av standards
  • Support CATV interface for Video Service and remote control by Major OLT
  • Support SIP Protocol for VoIP Service
  • Integrated line testing compliant with GR-909 on POTS
  • Support 802.11 b/g/a/n/ac/ax, 802.11ax WIFI6(4x4MIMO) function and Multiple SSID
  • Support NAT, Firewall function.
  • Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
  • Support power-off alarm function ,easy for link problem detection
  • Support port mode of VLAN configuration
  • Support LAN IP and DHCP Server configuration
  • Support TR069 Remote Configuration and WEB Management
  • Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode
  • Support IPv4/IPv6 dual stack
  • Support IGMP transparent/snooping/proxy
  • Support ACL and SNMP to configure data packet filter flexibly
  • Compatible with popular OLTs(HW, ZTE, FiberHome, VSOL,cdata,HS,samrl,U2000…)，supports OAM/OMCI management.

Specification:

Technical Item Details
PON interface 1 0G GPON Class B+)

Upstream: 1270nm; Downstream: 1577nm

single mode，SC/APC connector

Receiving sensitivity: ≤-29dBm

Transmitting optical power: 2~+8dBm

Overload optical power:  – 8dBm(GPON)

Transmission distance: 20KM
LAN interface 1×10/100/1000M/2500Mbps auto adaptive Ethernet interfaces Full/Half,

4 x 10/100/1000Mbps auto adaptive Ethernet interfaces

Full/Half, RJ45 connector
USB Interface Stamdard USB2.0、Stamdard USB3.0
WIFI Interface Compliant with IEEE802.11b/g/n/ac/ax

2.4GHz Operating frequency: 2.400-2.483GHz

5.0GHz Operating frequency: 5.150-5.825GHz

Support 4*4MIMO, 5dBi external antenna, rate up to 3000Mbps

Support: multiple SSID
CATV Interface 2xRF, optical power : +2~-15dBm

Optical reflection loss: ≥45dB

Optical receiving wavelength: 1550±10nm

RF frequency range: 47~1000MHz,  RF output impedance: 75Ω

RF output level: ≥ 80dBuV（-7dBm optical input）

AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm

MER: ≥32dB(-14dBm optical input), ＞35(-10dBm)
VOIP Port 1×VOIP RJ11 Connector
LED 17 LED,：PWR、LOSPON、INTERNET、LAN1、LAN2、LAN3、LAN4、2.4G,、5G、WPS、USB2.0/USB3.0、 FXS1/2.5GLAN、Normal 1(CATV1)/Normal  2(CATV2)
Push-Button 3, for Function of Power on/off, Reset, WPS
Operating condition Temperature : 0℃～+50℃

Humidity :10%～90%（non-condensing）
Storing Condition Temperature : -40℃～+60℃

Humidity :10%～90%（non-condensing）
Power supply DC 12V/1.5A
Power Consumption <18W
Net Weight <0.4kg

Panel lights and Introduction

Pilot  Lamp Status Description
WIFI

 

 

 On The WIFI interface is up.
Blink The WIFI interface is sending or/and receiving data (ACT).
Off The WIFI interface is down.
WPS

 

 Blink The WIFI interface is securely establishing a connection.
Off The WIFI interface does not establish a secure connection.
INTERNET

 

 On The light is on when the device business configuration is normal.
Off The light does not light up when the device service configuration is blocked.
PWR

 

 On The device is powered up.
Off The device is powered down.
LOS

 

 Blink The device doses not receive optical signals or with low signals.
Off The device has received optical signal.
PON

  

 On The device has registered to the PON system.
Blink The device is registering the PON system.
Off The device registration is incorrect.
LAN1~LAN5

 

 

 On Port (LANx) is connected properly (LINK).
Blink Port (LANx) is sending or/and receiving data (ACT).
Off Port (LANx) connection exception or not connected.
FXS

 

 

 On Telephone has registered to the SIP Server.
Blink Telephone has registered and data transmission (ACT).
Off Telephone registration is incorrect.
USB

 

 On USB device communication detected
Off No USB device detected or communicating
Normal

(CATV)

 

 On Input optical power is between -15dBm and 2dBm
Off Input optical power is higher than 2dBm or lower than -15dBm

 

Related products